Custom Quote: 112554.1.0
I. Power Control Devices to consist of:
A. TLRP-1
QTY: 1 - 7131A1075. IQ48 - Sensor IQ Mains Feed Wall Mount panel to contain:
-3 phase 120/208V; 400A;48 Pole breaker sub panel with no breakers
5 - 2x250MCM Main Lugs with option for main breaker
1 - Built-in Sequencer
1 - DMX Interface
1 - NET Interface
QTY: 1 - 7131A1551. IQ DOOR 120-48S - Sensor IQ Door, for surface mount 48-circuit panel
48 CB852-2 IQ SM B20 - Sensor IQ 120V 20A single pole intelligent breaker with relay; includes reporting for current, breaker trip, and relay state.
QTY: 1 - 7131K1303. IQ-LVD - Sensor IQ Low Voltage Dimming option card MK2
24 - 0-10V sink dimming outputs
- 100 mA maximum current sink per output
- 50 ballasts max per output
Maximum of two option cards per PCP-Mk2 processor
QTY: 1 - 7131K1004. IQ-RTO - RideThrough Option for Sensor IQ
B. TLRP-2
QTY: 1 - 7131A1075. IQ48 - Sensor IQ Mains Feed Wall Mount panel to contain:
3 phase 120/208V; 400A;48 Pole breaker sub panel with no breakers
5 - 2x250MCM Main Lugs with option for main breaker
1 - Built-in Sequencer
1 - DMX Interface
1 - NET Interface
QTY: 1 - 7131A1551 IQ DOOR 120-48S - Sensor IQ Door, for surface mount 48-circuit panel
QTY: 36 - CB852-2. IQ SM B20 - Sensor IQ 120V 20A single pole intelligent breaker with relay; includes reporting for current, breaker trip, and relay state.
QTY: 12 - CB1026-2. IQ B20 - Sensor IQ 120V 20A single pole breaker
QTY: 1 - 7131K1303. IQ-LVD - Sensor IQ Low Voltage Dimming option card MK2
24 - 0-10V sink dimming outputs
- 100 mA maximum current sink per output
- 50 ballasts max per output
Maximum of two option cards per PCP-Mk2 processor
QTY: 1 - 7131K1004 IQ-RTO - RideThrough Option for Sensor IQ
C. DRd12-24
QTY: 1 - 7183A1721. DRd12-24-120 - DRd12 100-120V Rack Enclosure - Designed for 3 phase
4 wire with ground operation at a maximum of 200A, 120/208V, 60Hz AC,
or 2 phase 3 wire with ground 120/240V, 60Hz AC
QTY: 1 - 7180A1709. URTO Mk2 - Unison Ride Thru Option Mk2
QTY: 1 - 7180A1037. P-DRD-TK Mk2 - DRd P-ACP-E Mk2 Termination Kit- Required for DRd
with Paradigm Mk2 processor, to include: - One DRd Lon Link, Panic,
DMX, Aux Rack Connection Card (Right I/O Card) - One DRd Network,
Contact Closure, RS-232 Termination Card (Left I/O Card) - One Cat5
Termination Kit - One 2 ft Cat5e Cable
QTY: 1 - 7180A1701. P-ACP-E - Paradigm Processor Mk2 - Enclosure for use in DRd Racks
and ERn enclosures. Includes front network connector, and front USB-A
connector, backlit number keypad, selector, and backlit display. Supports
2,048 channels of output and a max of 128 stations.
QTY: 1 - 7182A1701. P-SPM-E - Paradigm Station Power Module - supports 63 stations and (1) 500m wire segment
QTY: 10 - 7083A1023. D20E - Dual 20A Dimmer Module, 500µs rise time (20 Dimmers)
QTY: 2 - 7083A1072. AFM - AFM Air Flow Module
D. LCP-1A
QTY: 1 - 7179A1028. UFMP8 - Foundry 8 Zone Mini Panel to include:
- 120-277VAC, 20A power input
- Wall mounted
- DMX control input
- Eight fully rated 20 Amp relay outputs with manual switch override per
output
- Eight 0-10V dimming output rated for 100mA each
- NC maintained UL924 contact closure input
E. LCP-1B
QTY: 1 - 7179A1028. UFMP8 - Foundry 8 Zone Mini Panel to include:
- 120-277VAC, 20A power input
- Wall mounted
- DMX control input
- Eight fully rated 20 Amp relay outputs with manual switch override per
output
- Eight 0-10V dimming output rated for 100mA each
- NC maintained UL924 contact closure input
F. Emergency Transfer
QTY: 1 - 7180A1200. EBDK - Emergency Bypass Detection Kit
QTY: 1 - 7180A1236. DEBC-6 - DMX Emergency Bypass Controller, to consist of:
(1) DMX In and (6) DMX Out connections
Contact closure input
AC power input
(8) DMX Termination kits
QTY: 1 - 7131K1717. IQ-TAP - Sensor IQ Phase Bar Fuse Tap Kit
- compatible with 120V, 240V, and 277V Sensor IQ Panels
- compatible with IQ12, IQ24, and IQ48 panels
II. Distribution Devices to consist of:
A. PS-1, PS-2, PS-4, PS-5
QTY: 4 - QUOTE-30061 9915-(4TRO/4)-(2AD/1)-1DX-XX - Connector strip 15'-0” long with: 4 -
Panel mount 20A TRUEOne (TOP) connectors wired on 4 - 20A circuits 2
– Panel mount 20A Edison Duplex (5-20RD) connectors wired on 1 - 20A
circuits 1 – DMX OUT connector 4 – Hanging Brackets
B. PS-3
QTY: 1 - QUOTE-30061. 9924-(6TRO/6)-(2AD/1)-1DX-XX - Connector strip 24'-0” long with: 6 -
Panel mount 20A TRUEOne (TOP) connectors wired on 6 - 20A circuits 2
– Panel mount 20A Edison Duplex (5-20RD) connectors wired on 2 - 20A
circuits 1 – DMX OUT connector 6 – Hanging Brackets
C. PS-6, PS-7
QTY: 2 - QUOTE-30061. 9940-(8TRO/8)-(4AD/2)-2DX-XX - Connector strip 40'-0” long with: 8 -
Panel mount 20A TRUEOne (TOP) connectors wired on 8 - 20A circuits 4
– Panel mount 20A Edison Duplex (5-20RD) connectors wired on 2 - 20A
circuits 2 – DMX OUT connector 9 – Hanging Brackets
D. PB-1, PB-2, PB-5, PB-6, PB-7, PB-8
QTY: 6 - QUOTE-30014. 9203TRO-1AD - Custom Surface Outlet plate with: 3 – Panel mount 20A
TRUEOne (TOP1) connectors 1 – Panel mount 20A Edison Duplex
connectors
QTY:6 - 7099A1140. 4-gang (12") - Flush or Surface Distro Back Box
E. PB-3, PB-4
QTY:2 - QUOTE-30014 9201TRO-1AD - Custom Surface Outlet plate with: 1 – Panel mount 20A
TRUEOne (TOP1) connectors 1 – Panel mount 20A Edison Duplex
connectors
QTY: 2 - 7099A1139. 2-gang (6") - Flush or Surface Distro Back Box
F. PB-9, PB-10
QTY: 2 - QUOTE-30014. 9202TRO-2AD - Custom Surface Outlet plate with: 2 – Panel mount 20A
TRUEOne (TOP1) connectors 2 – Panel mount 20A Edison Duplex
connectors
QTY: 2 - 7099A1140. 4-gang (12") - Flush or Surface Distro Back Box
III. Equipment Racks to consist of:
A. LNCR
QTY:1 - QUOTE-10031. RACK - Black 19" rack sized as job requires and to include: quad power box, and blank panels to fill
QTY:1 - QUOTE-10273 REAR - Mounting or securing system for rack above with quad power box
QTY:1 - QUOTE-10274 RACK HW KIT - Hardware Kit for Equipment racks with blank panels and required hardware
QTY: 1 - QUOTE-10032 DOOR - Door for Rack
QTY:1 - M819 FURMAN PL-8C - Rack-mount Dimmable Light Module / Power
Conditioner
1. SW-1
QTY: 2 - 2100A2008. PATCH PANEL 24X - 2U 19" rack-mount patch panel with 24 open slots 48 N2027 Cat5e Modular Jack for above Patch Panel
QTY: 2 - SGE1061. MAP BR1 - 1U Brush Grommet Panel
QTY: 2 - 4265A1528-M C1300-24P-4X - Cisco Catalyst 1300 Series Switch with: (24) Gigabit
Ethernet PoE+ Ports with 120W power budget and (4) 10 Gigabit SFP+
ports, Fanless Operation, with ETC configuration preloaded
QTY: 4 - SGN1183 Mini-GBIC/SFP for Cisco Switch
UTP Copper - For connecting 2 Switches together via cat5e/6/6A (not fiber) - One needed per connection
2. GTW
QTY: 4 - 4268A1308. RSN-DMX8-T - Response Mk2 Eight-port DMX/RDM Gateway to include:
- Eight 3-pin terminal DMX connectors
- Display and 4-button user interface
- RJ45 Ethernet input
- Black Finish (1U High, 1/2U Wide)
QTY: 2 - 4260K1001. N3GA-RM - Gateway Rack Mount Kit (supports up to 2 Gateways, includes a blanking plate for 1 Gateway)
3. UPS
QTY:1 - PJE1074 MAP TD3 - 3 rack unit rack drawer with black textured finish
QTY: 1 - SGPS1137 MAP S2200R - 2150VA / 1650W 2U Rack-mount UPS
IV. Architectural Control Devices to consist of:
A. ES1, ES2, ES4, ES6, ES7, ES8, ES9, ES14, ES15, ES17, ES18
QTY: 11 - QUOTE-20317. 1IFP-X - 1-Gang Inspire Class 2 Faceplate - Standard Color TBD
QTY: 11 - QUOTE-20311 PI1001-_Z - Paradigm Inspire Button Station (Standard Color TBD) to include:
- 1-button electronics assembly
- Single gang decorator faceplate (not included)
- Custom laser engraved keycaps
- Installation hardware
B. ES3, ES5, ES10, ES11, ES12, ES13
QTY: 6 - QUOTE-20317 1IFP-X - 1-Gang Inspire Class 2 Faceplate - Standard Color TBD
QTY: 6 - QUOTE-20313 PI1004-_Z - Paradigm Inspire Button Station (Standard Color TBD) to include:
- 4-button electronics assembly
- Single gang decorator faceplate (not included)
- Custom laser engraved keycaps
- Installation hardware
C. ES16
QTY: 1 - QUOTE-20317. 1IFP-X - 1-Gang Inspire Class 2 Faceplate - Standard Color TBD
QTY: 1 - QUOTE-20315 PI1008-_Z - Paradigm Inspire Button Station (Standard Color TBD) to include:
- 8-button electronics assembly
- Single gang decorator faceplate (not included)
- Custom laser engraved keycaps
- Installation hardware
D. TP-2
QTY: 1 - 7184A1542-4. P-TS7-E-4 - Paradigm 7" Touchscreen Station to include: - 7" Black
Touchscreen Assembly - Mounting Collar - Ethernet termination kit
QTY: 1 - 7184A1502 P-LCD-FBB - Paradigm flush mount touchscreen back box
QTY: 1 - 7184A1504-4 P-LCD-LC-4 - Black Paradigm Touchscreen Wall-mount Locking Cover
E. TP-1
QTY :1 - 7184A1562 P-TS7-PE - Paradigm 7" Ethernet Portable Touchscreen Station to include:
- 7" Black Portable Touchscreen - 10' Ethercon to RJ-45 cable
QTY:1 - SGM1375. 25' NET CABLE - 25' Network Cable - Proplex (Cat 5, Neutrik Ethercon)
V. Control Devices to consist of:
A. SPS
QTY:1 - QUOTE-10024. ECPB NET / NET / AC - NET / NET / A/C Control Plug-in Station with: 1 -
XLR-5FDM3 DMX Out Connector(s) 2 - RJ-45 (568B) Connector in XLR
case 1 - Edison Duplex (5-20RD) connector with voltage barrier and
custom labels
B. BPS-1 and BPS-2
QTY: 2 - QUOTE-10024. ECPB NET / NET / NET / AC - NET / NET / NET / A/C Control Plug-in
Station with: 3 - RJ-45 (568B) Connector in XLR case 1 - Edison Duplex
(5-20RD) connector with voltage barrier and custom labels
C. DMX Out
QTY: 10 - Custom Item. ECPB DMX OUT - DMX Output Control Plug-in Station with: 1 - XLR-5FDM3 DMX Out Connector with custom labels
QTY: 2 - 1064A1037. 1SBD-4 - ETC 1-gang Surface Mount Back Box (3.5" deep)