Custom Quote: 113276.1.0
I. Power Control Devices to consist of:
A. TRP-1, TRP-2
QTY: 2- 7131A1075 IQ48 - Sensor IQ Mains Feed Wall Mount panel to contain:
3 phase 120/208V; 400A;48 Pole breaker sub panel with no breakers
QTY: 5- 2x250MCM Main Lugs with option for main breaker
QTY: 1- Built-in Sequencer
QTY: 1- DMX Interface
QTY: 1- NET Interface
QTY: 2- 7131A1551 IQ DOOR 120-48S - Sensor IQ Door, for surface mount 48-circuit panel
QTY: 2- 1100A4055-ENGR - Lamacoid door label for Sensor IQ, ERP-FT, and ERP Relay Panel
QTY: 2- 7131K1346 IQ-MB400A65K - 3-phase 120V IQ Main Breaker Kit - 400A, 65kA SCCR, top feed
QTY: 96- CB852-2- IQ SM B20 - Sensor IQ 120V 20A single pole intelligent breaker with relay; includes reporting for current, breaker trip, and relay state.
QTY: 2- 7131K1303 IQ-LVD - Sensor IQ Low Voltage Dimming option card MK2
QTY: 24 - 0-10V sink dimming outputs
- 100 mA maximum current sink per output
- 50 ballasts max per output
Maximum of two option cards per PCP-Mk2 processor
QTY: 2- 7131K1004 IQ-RTO - RideThrough Option for Sensor IQ
B. Distributed Dimmer
QTY: 6- 7145A1101-0B- ES750-B - Black ES750 Dimmer for Tungsten light sources only, 750W Max Output, installed Two-pin and Ground (Stage Pin) input connector,
installed Two-pin and Ground (Stage Pin) output connector. Includes hardware for pipe-mount or yoke-mount applications.
QTY: 6 - 7060A2009- 400CC - Black C-Clamp
QTY: 6 - 7060A1022- 400SC - Black Safety Cable
II. Distribution Devices to consist of:
A. PBR-0/3/0 Floor Box TD: 101, 102, 103, 104, 105, 106
QTY: 6 - PSD8518- FLOOR POCKET COVER - Floor Pocket Cover
QTY: 6 - PSD8519- FP WELDMENT - Floor Pocket Weldment
QTY: 6 - Custom Item 8503B - Floor pocket insert plate with 3 - 20A Stage Pin (2P&G/GPC) connectors with custom labels
B. PBP-0/3/0 - TD: 301, 302, 303, 304, 305
QTY: 5 - QUOTE-30014 9303BP24 - Custom Surface Outlet plate with: 3 - 24" pigtails and 20A Stage Pin (2P&G/GPC) connectors wired on 3 - 20A circuits with Custom labels
QTY: 5 - 7099A1142 3-gang (9") - Flush or Surface Distro Back Box
QTY: 10- 2276K1000- Single Pipe Strap Style U-Bolt Kit (2 Needed for 3 gang and above)
C. PBP-0/2/0 - TD: 107, 109, 111, 113
QTY: 4 - QUOTE-30014- 9303BP24 - Custom Surface Outlet plate with: 3 - 24" pigtails and 20AStage Pin (2P&G/GPC) connectors wired on 3 - 20A circuits with Custom labels
QTY: 4 - 7099A1142- 3-gang (9") - Flush or Surface Distro Back Box
QTY: 8 - 2276K1000- Single Pipe Strap Style U-Bolt Kit (2 Needed for 3 gang and above)
D. PSP-0/8/0 W/EN2 - TD: 203, 204
QTY: 2 - QUOTE-30061- 9941-(16BP/8)-1R2O-XX - Connector strip 41'-0” long with: 16 - 18”pigtails and 20A Stage Pin (2P&G/GPC) connectors wired on 8 - 20A circuits 1 - Two Port Gateway 10 – Hanging Brackets
E. PSP-0/10/0 W/EN2 - TD: 202
QTY: 1- QUOTE-30061- 9941-(20BP/10)-1R2O-XX - Connector strip 41'-0” long with: 20 - 18”
pigtails and 20A Stage Pin (2P&G/GPC) connectors wired on 10 - 20A
circuits 1 - Two Port Gateway 10 – Hanging Brackets
F. PSP-0/8/0 W/EN2 - TD: 201
QTY: 1- QUOTE-30061- 9941-(28BP/14)-1R2O-XX - Connector strip 41'-0” long with: 28 - 18”
pigtails and 20A Stage Pin (2P&G/GPC) connectors wired on 14 - 20A
circuits 1 - Two Port Gateway 10 – Hanging Brackets
III. Equipment Racks to consist of:
A. CR-1
QTY: 1- QUOTE-10031 RACK - Black 19" rack sized as job requires and to include: quad power box, and blank panels to fill
QTY: 1 - QUOTE-10273 REAR - Mounting or securing system for rack above with quad power box
QTY: 1- QUOTE-10032 DOOR - Door for Rack
QTY: 1- QUOTE-10274 RACK HW KIT - Hardware Kit for Equipment racks with blank panels and required hardware
QTY: 1- CUSTOM 1U Rack ID Panel
QTY: 1- SGHW1177 LITTLITE RL-10-D-LED - Dual Gooseneck LED Rack Light Panel
QTY: 1- 7180A1713 ERn2-RM-120 Mk2 - ERn2 Enclosure Rack-mount 100-120 V Mk2
QTY: 1- 7180A1701 P-ACP-E - Paradigm Processor Mk2 - Enclosure for use in DRd Racks and ERn enclosures. Includes front network connector, and front USB-A
connector, backlit number keypad, selector, and backlit display. Supports
2,048 channels of output and a max of 128 stations.
QTY: 1- 7182A1701- P-SPM-E - Paradigm Station Power Module - supports 63 stations and (1) 500m wire segment
QTY: 1- CUSTOM 2U CST PATCH - 2U Custom labeled patch panel
QTY: 1- CUSTOM 1U Patch Panel Label
QTY: 24- N2027 Cat5e Modular Jack for above Patch Panel
QTY: 1- PJE1021- Snap-in blank for above Patch Panel
QTY: 1- SGE1062 MAP BR2 - 2U Brush Grommet Panel
QTY: 24- CUSTOM 3' CAT5 Patch cable, black
QTY: 1- 4265A1428-M- C1300-24P-4G - Cisco Catalyst 1300 Series Switch with: (24) Gigabit Ethernet PoE+ Ports with 195W power budget and (4) SFP ports, Fanless Operation, with ETC configuration preloaded
QTY: 2- SGN1183- Mini-GBIC/SFP for Cisco Switch UTP Copper - For connecting 2 Switches together via cat5e/6/6A (not
fiber) - One needed per connection
QTY: 1- 4268A1236- RSN-DMX4-T-RACK - Response Mk2 Four-port DMX/RDM Gateway to include:
- Four 3-pin terminal DMX connectors
- Display and 4-button user interface
- RJ45 Ethernet input
- Black Finish
- 1U Rack Mount Kit
QTY: 1- 4268A1235- RSN-DMX4-T - Response Mk2 Four-port DMX/RDM Gateway to include:
- Four 3-pin terminal DMX connectors
- Display and 4-button user interface
- RJ45 Ethernet input
- Black Finish
QTY: 1- 4267A1234- RSN-OPTO-16T - Response Opto-Splitter
16 Terminal Output Ports
1 In and 1 Thru Ports
Rack-mounted
QTY: 1- SGE1467 MAP UD1 - 1 rack unit Sliding shelf or Utility Drawer, black powder finish
1 SGM1916-C LAPTOP - Laptop Project PC - Software installed as specified
1 PJE1075 MAP TD3LK - 3 rack unit rack drawer with black textured finish and key
lock
QTY: 1- SGPS07 APC SMART UPS - APC Smart-UPS 1500VA/1340W rack-mount UPS
with 6 - NEMA 5-15R outputs -USB
B. WAP - TC:
QTY: 1- SGN-WAX610-M- WAX610 - Netgear indoor WAX610 Wireless Access Point - Dual band
802.11a/b/n/ac/ax - PoE powered (for up to 31 in the system)
QTY: 1- 1094A1045 ECPB NET - ETCNet Control Plug-in Station with:
QTY: 1 - RJ-45 (568B) Connector in XLR case (labeled 'ETCNet')
QTY: 1- 1064A1023 ECPB PB1 - ETC 1-gang Surface Mount Back Box (2.5" deep)
C. Spec Section 116163 - Item 1.7-A, B - Maintenance Materials
QTY: 1- CUSTOM 10% total quantity of each type of small component or part in system as spare parts with container
QTY: 5- CB852-2 IQ SM B20 - Sensor IQ 120V 20A single pole intelligent breaker with relay;
includes reporting for current, breaker trip, and relay state.
QTY: 1- 4268A1122-4 RSN-DMX2-O-P-4 - Response Mk2 Two-port Portable DMX/RDM
Gateway to include:
- Gateway Electronics with two 5-pin XLR DMX output connectors
- Backbox with mounting bracket and Ethernet input
- Display and 4-button user interface
- Black Finish
QTY: 1- 4268A1020-4 RSN-DMX1-O-4 - Response Mk2 One-port DMX/RDM Gateway to include:
- Gateway Electronics with one 5-pin XLR DMX output connector
- 1-gang decorator faceplate
- Display and user interface
- Black Finish
IV. Architectural Control Devices to consist of:
A. EP Flush Mount - TC: 172
QTY: 1- CUSTOM UH10001-_Z - Black 1-gang faceplate assembly to include the following:
QTY: 1- Select Switch(es) Custom nomenclature to be determined
QTY: 1- 7181B2004 UH10001 - 1-gang, 1-button electronics assembly
B. EP Surface Mount - TC:171, 173, 174, 175, 176, 177
QTY: 6- CUSTOM UH10001-4Z - Black 1-gang faceplate assembly to include the following:
QTY: 1- Select Switch(es) Custom nomenclature to be determined
QTY: 6- 7181B2004 UH10001 - 1-gang, 1-button electronics assembly
QTY: 6 - 7081A2004-1 SBB1 - Unison 1-gang surface-mounted back box
C. TP Surface Mount - TC: 151
QTY: 1- 7184A1542-4 P-TS7-E-4 - Paradigm 7" Touchscreen Station to include: - 7" Black
Touchscreen Assembly - Mounting Collar - Ethernet termination kit
QTY: 1- 7184A1503 P-LCD-SBB - Paradigm surface mount touchscreen back box
D. TPP
QTY: 1- 7184A1562 P-TS7-PE - Paradigm 7" Ethernet Portable Touchscreen Station to include:
QTY: 1- 7" Black Portable Touchscreen - 10' Ethercon to RJ-45 cable
V. Control Devices to consist of:
A. RFU
QTY: 1- 4250A1222 ETCPAD - ETCpad - Portable Access Device - 8" Industrial Tablet - Connects via WiFi or included RJ45 adapter - Includes hand strap, USB
Hub, and charger
QTY: 1- M7583 M7583 - ETCpad Hand Strap (Replacement)
QTY: 1- M7777 ETCpad EETI stylus pen AIM-75
QTY: 1- M7589-US ETCpad Office Dock with power cable
B. EN Surface Mount - TC: 103, 104, 105, 106, 107, 108
QTY: 6- 4268A1020-4 RSN-DMX1-O-4 - Response Mk2 One-port DMX/RDM Gateway to include:
- Gateway Electronics with one 5-pin XLR DMX output connector
- 1-gang decorator faceplate
- Display and user interface
- Black Finish
QTY: 6- 1064A1037 1SBD-4 - ETC 1-gang Surface Mount Back Box (3.5" deep)
C. EN2 Surface Mount - TC: 301
QTY: 1- 4268A1120-4 RSN-DMX2-O-4 - Response Mk2 Two-port DMX/RDM Gateway to include:
- Gateway Electronics with two 5-pin XLR DMX output connectors
- Two-port faceplate
- Display and 4-button user interface
- Black Finish
QTY: 1- 1064A1038 2SBD-4 - ETC 2-gang Surface Mount Back Box (3.5" deep)
D. Surface Mount - ET: 109, 302
QTY: 2- CUSTOM ECPB NET - Control Plug-in Station with: 1 - RJ-45 (568B) Connector(s)
in XLR case(s) with custom labels as required
QTY: 2 1064A1037 1SBD-4 - ETC 1-gang Surface Mount Back Box (3.5" deep)
E. Surface Mount - ET2: 101, 102
QTY: 2 CUSTOM ECPB N/N - Control Plug-in Station with: 2 - RJ-45 (568B) Connector(s)
in XLR case(s) with custom labels as required
QTY: 2- 1064A1038 2SBD-4 - ETC 2-gang Surface Mount Back Box (3.5" deep)
F. Flush Mount - ET2: 110
QTY: 1- CUSTOM ECPB N/N - Control Plug-in Station with: 2 - RJ-45 (568B) Connector(s)
in XLR case(s) with custom labels as required
G. Portable Gateways
QTY: 2- 4268A1122-4 RSN-DMX2-O-P-4 - Response Mk2 Two-port Portable DMX/RDM
Gateway to include:
- Gateway Electronics with two 5-pin XLR DMX output connectors
- Backbox with mounting bracket and Ethernet input
- Display and 4-button user interface
- Black Finish
QTY: 2- PSF1133 MEGA-CLAW-BK - Mega-Claw clamp for 1.9" pipe / 2.0" truss, black
QTY: 2- 7060A1022 400SC - Black Safety Cable