1. Products
  2. Custom Quote: ETC Quotation # 62458.3.0

Custom Quote: ETC Quotation # 62458.3.0

I. Power Control Devices to consist of:

A. DR-A

QTY: 1. 7141A1005-4
SR3-48 - Black Sensor3 48-Module Dimmer Rack - Designed for 3 phase 4 wire and ground operation at a maximum of 800A, 120/208V, 60Hz AC
QTY: 1. 7141A2006-4
SR3-48 DOOR - Black SR3-48 Locking Door with Filter
QTY: 4. HW6109
FVIP-RED - Floor Mount Iso Pads - Vibration Isolation Pads NDB-Red
QTY: 1. 7140A1003
CEM3 - CEM3 Control Module for use in Sensor3 Dimmer Racks. Includes front network connector, front USB reader, backlit number keypad, selector wheel, and backlit display. Supports 2- DMX IN, 1-additional Network, Panic Input, and RTO or BP connection
QTY: 1. 7140K1001
SR3-RTO - Sensor3 Ride Thru Kit - supplies power to CEM3 Control Module for a minimum of 6 seconds during brief power outages
QTY: 48. 7083A1185
R20 - Dual 20A Relay module (96 Relays)



B. DR-B

QTY: 1. 7141A1005-4
SR3-48 - Black Sensor3 48-Module Dimmer Rack - Designed for 3 phase 4 wire and ground operation at a maximum of 800A, 120/208V, 60Hz AC
QTY: 1. 7141A2006-4
SR3-48 DOOR - Black SR3-48 Locking Door with Filter
QTY: 4. HW6109
FVIP-RED - Floor Mount Iso Pads - Vibration Isolation Pads NDB-Red
QTY: 1.
7140A1003
CEM3 - CEM3 Control Module for use in Sensor3 Dimmer Racks. Includes front network connector, front USB reader, backlit number keypad, selector wheel, and backlit display. Supports 2- DMX IN, 1-additional Network, Panic Input, and RTO or BP connection
QTY: 1.
7140K1001
SR3-RTO - Sensor3 Ride Thru Kit - supplies power to CEM3 Control Module for a minimum of 6 seconds during brief power outages
QTY: 18.
7050A1031
D20E - Dual 20A Dimmer Module, 500µs rise time (36 Dimmers)
QTY: 30.
7083A1185
R20 - Dual 20A Relay module (60 Relays)


C. TLRP-A

QTY: 1. 7131A1075
IQ48 - Sensor IQ Mains Feed Wall Mount panel to contain:
3 phase 120/208V; 400A;48 Pole breaker sub panel with no breakers
5 - 2x250MCM Main Lugs with option for main breaker
1 - Built-in Sequencer
1 - DMX Interface
1 - NET Interface
QTY: 1. 7131A1551
IQ DOOR 120-48S - Sensor IQ Door, for surface mount 48-circuit panel
QTY: 1. 7131K1346
IQ-MB400A65K - 3-phase 120V IQ Main Breaker Kit - 400A, 65kA SCCR, top feed
QTY: 40. CB852-2
IQ SM B20 - Sensor IQ 120V 20A single pole intelligent breaker with relay; includes reporting for current, breaker trip, and relay state.
QTY: 6. CB1026-2
IQ B20 - Sensor IQ 120V 20A single pole breaker
QTY: 1. CB855-2
IQ SM B202 - Sensor IQ 120/208V 20A 2 pole intelligent breaker with relay; includes reporting for current, breaker trip, and relay state.
QTY: 1. 7131K1303
IQ-LVD - Sensor IQ Low Voltage Dimming option card MK2
24 - 0-10V sink dimming outputs
- 100 mA maximum current sink per output
- 50 ballasts max per output
Maximum of two option cards per PCP-Mk2 processor
QTY: 1. 7131K1004
IQ-RTO - RideThrough Option for Sensor IQ


D. AEM1, AEM2, AEM3

QTY: 3. 7179A1028
UFMP8 - Foundry 8 Zone Mini Panel to include:
- 120-277VAC, 20A power input
- Wall mounted
- DMX control input
- Eight fully rated 20 Amp relay outputs with manual switch override per output
- Eight 0-10V dimming output rated for 100mA each
- NC maintained UL924 contact closure input


E. Emergency Transfer

QTY: 1. 7180A1200
EBDK - Emergency Bypass Detection Kit
QTY: 1. 7180A1236
DEBC-6 - DMX Emergency Bypass Controller, to consist of:
(1) DMX In and (6) DMX Out connections
Contact closure input
AC power input
(8) DMX Termination kits
QTY: 1. 7131K1717
IQ-TAP - Sensor IQ Phase Bar Fuse Tap Kit
- compatible with 120V, 240V, and 277V Sensor IQ Panels
- compatible with IQ12, IQ24, and IQ48 panels


II. Distribution Devices to consist of:


A. PB-TBD Lighting Deck

QTY: 9. QUOTE-30014
9102TO - Surface Mount Outlet Box with: 2 – Panel mount 20A TRUEOne (TOP1) connectors with custom labels

B. PB-4, PB-9, PB-17, PB-22 Lighting Deck

QTY: 4. QUOTE-30014
9101TO-1BO - Surface Mount Outlet Box with: 1 – Panel mount 20A Stagepin (2P&G connectors 1 – Panel mount 20A TRUEOne (TOP1) connectors with custom labels

C. PB-1TBD

QTY: 12. QUOTE-30014
9102TO - Surface Mount Outlet Box with: 2 – Panel mount 20A TRUEOne (TOP1) connectors with custom labels

D. WP-1 and WP-6

QTY: 2. Custom Item
9602TO-1B - Wall pocket plate with 2 – Panel mount 20A TRUEOne (TOP1) connectors 1 - 20A Stage Pin (2P&G/GPC) connector with custom labels

E. WP-2, WP-3, WP-4, WP-5

QTY: 4. Custom Item
9602TO - Wall pocket plate with 2 – Panel mount 20A TRUEOne (TOP1) connectors with custom labels

F. PB-26, PB-28, PB-29, PB-31

QTY: 4. QUOTE-30014
9104TO-1BO - Plate only Outlet Box with: 1 – Panel mount 20A Stagepin (2P&G connectors 1 – Panel mount 20A TRUEOne (TOP1) connectors with custom labels

G. PB-38, PB-39

QTY: 2. QUOTE-30014
9104TO-1BO - Surface Mount Outlet Box with: 1 – Panel mount 20A Stagepin (2P&G connectors 4 – Panel mount 20A TRUEOne (TOP1) connectors with custom labels

H. PB-27, PB-30

QTY: 2. QUOTE-30014
9102TO - Cover plate Outlet Box with: 2 – Panel mount 20A TRUEOne (TOP1) connectors with custom labels

I. PB-32, PB-33

QTY: 2. QUOTE-30014
9102TO-1BO - Surface Mount Outlet Box with: 1 – Panel mount 20A Stagepin (2P&G connectors 2 – Panel mount 20A TRUEOne (TOP1) connectors with custom labels

J. FP-1, FP-3, FP-5, FP-8, FP-12, FP-14

QTY: 6. QUOTE-30022
8502TO - Floor pocket insert plate with: 2 – Panel mount 20A TRUEOne (TOP1) connectors

K. FP-6, FP-10

QTY: 2. QUOTE-30022
8503TO - Floor pocket insert plate with: 3 – Panel mount 20A TRUEOne (TOP1) connectors

L. FP-2, FP-4, FP-7, FP-9, FP-11, FP-13

QTY: 6. QUOTE-30022
8501TO-1B - Floor pocket insert plate with: 1 – Panel mount 20A Stagepin (2P&G connectors 1 – Panel mount 20A TRUEOne (TOP1) connectors

M. PB-34, PB-37

QTY: 2. QUOTE-30014
9102TO - Cover plate Outlet Box with: 2 – Panel mount 20A TRUEOne (TOP1) connectors with custom labels

N. PB-35, PB-36

QTY: 2. QUOTE-30014
9101TO-1BO - Cover plate Outlet Box with: 1 – Panel mount 20A Stagepin (2P&G connectors 2 – Panel mount 20A TRUEOne (TOP1) connectors with custom labels

O. Connector Strips: PS-1, PS-2, PS-3

QTY: 3. QUOTE-30061
9945-(14TRP/14)-(6BO/3)-(3CO/1)-2DX-XX - Connector strip 45'-0” long with: 14 - 18” pigtails and 20A TRUEOne (TOP1) connectors wired on 14 - 20A circuits 6 – Panel mount 20A Stagepin (2P&G) connectors wired on 3 - 20A circuits 3 – Panel mount 20A Grounded Twist-Lock (L5-20R) connectors wired on 1 - 20A circuits 1 – Active Pass-Thru DMX connectors (XLR-5FDM3) with power supply 1 – XLR-5FDM3 DMX out connector wired on X universes 13 – Hanging Brackets

P. Connector Strips; PS-4

QTY: 1. QUOTE-30061
9945-(10TRP/10)-(4BO/2)-2DX-XX - Connector strip 45'-0” long with: 10 - 18” pigtails and 20A TRUEOne (TOP1) connectors wired on 10 - 20A circuits 4 – Panel mount 20A Stagepin (2P&G) connectors wired on 2 - 20A circuits 1 – Active Pass-Thru DMX connectors (XLR-5FDM3) with power supply 1 – XLR-5FDM3 DMX out connector wired on X universes 13 – Hanging Brackets

Q. Connector Strips: PS-5

QTY: 1. QUOTE-30061
9945-(10TRP/10)-(4BO/2)-(3CO/1)-2DX-XX - Connector strip 45'-0” long with: 10 - 18” pigtails and 20A TRUEOne (TOP1) connectors wired on 10 - 20A circuits 4 – Panel mount 20A Stagepin (2P&G) connectors wired on 2 - 20A circuits 3 – Panel mount 20A Grounded Twist-Lock (L5-20R) connectors wired on 1 - 20A circuits 1 – Active Pass-Thru DMX connectors (XLR-5FDM3) with power supply 1 – XLR-5FDM3 DMX out connector wired on X universes 13 – Hanging Brackets

R. DJB1 thru DJB5 and OL1 thru OL3

QTY: 5. 7099A1725
9725 - Gridiron Junction Box with mounting hardware and terminals for (25) 20A circuits
QTY: 8. 7099A1702-1
DMX/1(XLR) - DMX Gridiron Junction Box with 1 connectorized DMX output
QTY: 750. W715
12/26 SO - 12 gauge, 26 conductor SO Multicable (2 runs of 75') per electric
QTY: 5. 1085A1003
CD100-DMX - 100' DMX Cable
QTY: 20. 8001A2080
Traditional Cable Management single-purchase cable cradle
QTY: 20. HW636
MED LG KELLEMS - Dusttight Kellems grip for use with 10/16, 10/20, or 12/20 through 12/26 SO 1.25 to 1.50DIA
QTY: 10. HW6203
MLG SINGLE-EYEPKUP - Single-eye Pick-up grip for use with 10/16, 10/20, or 12/20 through 12/26 SO 1.25 to 1.49 DIA



III. Equipment Racks to consist of:

A. LNCR

QTY: 1. QUOTE-10031
RACK - Black 19" rack sized as job requires and to include: quad power box, and blank panels to fill
QTY: 1. QUOTE-10273
REAR - Mounting or securing system for rack above with quad power box
QTY: 1. QUOTE-10032
DOOR - Door for Rack
QTY: 1. QUOTE-10274
RACK HW KIT - Hardware Kit for Equipment racks with blank panels and required hardware

-1. CTRL-1
QTY: 1. 7180A1713
ERn2-RM-120 Mk2 - ERn2 Enclosure Rack-mount 100-120 V Mk2
QTY: 1. 7180A1701
P-ACP-E - Paradigm Processor Mk2 - Enclosure for use in DRd Racks and ERn enclosures. Includes front network connector, and front USB-A connector, backlit number keypad, selector, and backlit display. Supports 2,048 channels of output and a max of 128 stations.
QTY: 1. 7182A1701
P-SPM-E - Paradigm Station Power Module - supports 63 stations and (1) 500m wire segment
QTY: 1. 7180A1709
URTO Mk2 - Unison Ride Thru Option Mk2

-2. SW-1 and NET Patch
QTY: 1. 2100A2008
PATCH PANEL 24X - 2U 19" rack-mount patch panel with 24 open slots
QTY: 24. N2027
Cat5e Modular Jack for above Patch Panel
QTY: 1. PJE1021
Snap-in blank for above Patch Panel
QTY: 1. SGE1061
MAP BR1 - 1U Brush Grommet Panel
QTY: 24. N4035
2' CAT5 Patch cable, black
QTY: 1.
SGN-C1300-28P-M
C1300-24P-4G - Cisco Catalyst 1300 Series Switch with: (24) Gigabit Ethernet PoE+ Ports with 195W power budget and (4) SFP ports, Fanless Operation, with ETC configuration preloaded

-3. GTW-1 tru GTW-4
QTY: 4. 4268A1308
RSN-DMX8-T - Response Mk2 Eight-port DMX/RDM Gateway to include:
- Eight 3-pin terminal DMX connectors
- Display and 4-button user interface
- RJ45 Ethernet input
- Black Finish (1U High, 1/2U Wide)
QTY: 2. 4260K1001
N3GA-RM - Gateway Rack Mount Kit (supports up to 2 Gateways, includes a blanking plate for 1 Gateway)

-4. Drawer and UPS
QTY: 1. PJE1074
MAP TD3 - 3 rack unit rack drawer with black textured finish
QTY: 1. SGPS1137
MAP S2200R - 2150VA / 1650W 2U Rack-mount UPS


B. LNCR2

QTY: 1. QUOTE-20321
DIN TBD - Custom sized DIN enclosure as job requires and to include: DIN rails, Voltage barrier, edison outlet, and removable cover
QTY: 1. QUOTE-20322
DIN PATCH - Custom Patch panel for mounting in DIN enclosure
QTY: 1. QUOTE-20323
DIN PLATE - Custom plate to mount 8 or 16 port Switch to DIN rail
QTY: 1. 4265A1410-M
C1300-8P-E-2G - Cisco Catalyst 1300 Series Switch with: (8) Gigabit Ethernet PoE+ Ports with 67W power budget and (2) Gigabit Copper/SFP combo ports, Fanless Operation, with ETC configuration preloaded
QTY: 2. 4268A1244
RSN-DMX4-DIN - Response Mk2 Four-port DMX/RDM Gateway to include:
- Four 3-pin terminal DMX connectors
- Din-rail mounted chassis
- Display and 4-button user interface
- RJ45 Ethernet input




IV. Architectural Control Devices to consist of:

A. ES

QTY: 7. QUOTE-20317
1IFP-X - 1-Gang Inspire Class 2 Faceplate - Standard Color TBD
QTY: 7. QUOTE-20311
PI1001-_Z - Paradigm Inspire Button Station (Standard Color TBD) to include:
- 1-button electronics assembly
- Single gang decorator faceplate (not included)
- Custom laser engraved keycaps
- Installation hardware
QTY: 3. 2276K1000
Single Pipe Strap Style U-Bolt Kit (2 Needed for 3 gang and above)
QTY: 3. 2211A2001
1G BACKBOX 3.5" DISTRO UBOLT MNT BLK
QTY: 7. 7081A2004-1
SBB1 - Unison Black 1-gang surface-mounted back box


B. ES5, ES7, ES14, ES21

QTY: 4. QUOTE-20317
1IFP-X - 1-Gang Inspire Class 2 Faceplate - Standard Color TBD
QTY: 4. QUOTE-20312
PI1002-_Z - Paradigm Inspire Button Station (Standard Color TBD) to include:
- 2-button electronics assembly
- Single gang decorator faceplate (not included)
- Custom laser engraved keycaps
- Installation hardware
QTY: 4. 7081A2004-1
SBB1 - Unison Black 1-gang surface-mounted back box


C. ES4

QTY: 1. QUOTE-20317
1IFP-X - 1-Gang Inspire Class 2 Faceplate - Standard Color TBD
QTY: 1. QUOTE-20313
PI1004-_Z - Paradigm Inspire Button Station (Standard Color TBD) to include:
- 4-button electronics assembly
- Single gang decorator faceplate (not included)
- Custom laser engraved keycaps
- Installation hardware
QTY: 1. 7081A2004-1
SBB1 - Unison Black 1-gang surface-mounted back box


D. ES1, ES2, ES3, ES6

QTY: 4. QUOTE-20317
1IFP-X - 1-Gang Inspire Class 2 Faceplate - Standard Color TBD
QTY: 4. QUOTE-20315
PI1008-_Z - Paradigm Inspire Button Station (Standard Color TBD) to include:
- 8-button electronics assembly
- Single gang decorator faceplate (not included)
- Custom laser engraved keycaps
- Installation hardware
QTY: 4. 7081A2004-1
SBB1 - Unison Black 1-gang surface-mounted back box


E. Switch

QTY: 14. Custom Item
One Button Contact Stations with Stainless Steel Faceplates

F. TP-2 SMP

QTY: 1. 7184A1542-4
P-TS7-E-4 - Paradigm 7" Touchscreen Station to include: - 7" Black Touchscreen Assembly - Mounting Collar - Ethernet termination kit
QTY: 1. 7184A1521
P-TS7-RM - Paradigm 7" Touchscreen Rack-Mount Kit


G. TP-1 BMP

QTY: 1. 7184A1562
P-TS7-PE - Paradigm 7" Ethernet Portable Touchscreen Station to include: - 7" Black Portable Touchscreen - 10' Ethercon to RJ-45 cable
QTY: 1. SGM1375
25' NET CABLE - 25' Network Cable - Proplex (Cat 5, Neutrik Ethercon)


H. UCI1, UHCI2, UCI3

QTY: 3. 7181A1022
UHCI-WM - Unison Contact Interface - Wall-mount with Unison satellite board wired for (8) dry contact inputs and (8) relay outputs


V. Architectural Fixtures to consist of:


A. Blues

QTY: 8. 7492A1104
BSBBMFLB - BluesSystem BlueBeam Low-Voltage Luminaire with:
- Medium flood beam
- Black housing
- Blue LED
- Requires optional adaptor plate to mount to standard electrical box
- Requires BluesSystem LV Power Supply
QTY: 8. QUOTE-40052
TBD BluesSystem Mounting Plate
QTY: 8. 7492A1011
BSC - BluesSystem Cowl Light Spill Baffle for use with BlueSystem Luminaires
QTY: 1. 7492A1005
BSPS6WA - BluesSystem LV 6 Zone 0-10V Power Supply to Include:
- 100-240VAC power input
- 0-10V control input
- Six 36VDC Dimmed outputs each with support for 10 BlueBeams or BlueDomes
- Wall-mount enclosure


VI. Control Devices to consist of:

A. Control Console

QTY: 1. 4311A1022-US
ION XE 20 12K-US - ION XE 20 12K-US - Ion Xe 20 12K Console with 12,288 Outputs/Parameters, ships with:
1 - 3-button scroll mouse
1 - External keyboard
1 - Locking regionalized IEC power cord
1 - M7183 Littlite LED console work light
1 - Ion Xe dust cover
1 - Augment3d AR target kit
https://www.etcconnect.com/Products/Consoles/Eos-Consoles/Ion-Xe/Documentation.aspx


B. BPS1

QTY: 1. QUOTE-10024
ECPB NET/NET/NET/AC - Net / Net / Net / A/C Control Plug-in Station with: 3 - RJ-45 (568B) Connector in XLR case 1 - Edison Duplex (5-20RD) connector with voltage barrier and custom labels
QTY: 1. 1064A1040
4SBD-4 - ETC 4-gang Surface Mount Back Box (3.5" deep)


C. SPS, BPS2. BPS3

QTY: 3. QUOTE-10024
ECPBDMX OUT/NET/NET/AC - DMX OUT / Net / Net / A/C Control Plug-in Station with: 1 - DMX Out Connector 2 - RJ-45 (568B) Connector in XLR case 1 - Edison Duplex (5-20RD) connector with voltage barrier and custom Labels
QTY: 3. 1064A1040
4SBD-4 - ETC 4-gang Surface Mount Back Box (3.5" deep)


D. DO1 thru DO-5, DO-11 thru DO16

QTY: 11. Custom Item
ECPB DMX OUT - DMX Output Control Plug-in Station with:
1 - XLR-5FDM3 DMX Out Connector (labeled ""DMX OUTPUT"")
QTY: 11. 1064A1023
ECPB PB1 - ETC 1-gang Surface Mount Back Box (2.5" deep)


E. DO17 thru DO-20

QTY: 4. Custom Item
ECPB DMX OUT - DMX Output Control Plug-in Station with:
1 - XLR-5FDM3 DMX Out Connector (labeled ""DMX OUTPUT"")
QTY: 4. 1064A1023
ECPB PB1 - ETC 1-gang Surface Mount Back Box (2.5" deep)
QTY: 4. 7099A1052
UBOLTKITOFFSET - Offset U-Bolt Pipe-mounting Assembly