Eaton Rapids Quote #98944.1.1

I. Power Control Devices to consist of:
A. DR-A.
QTY: 1. 7141A1005-4. SR3-48 - Black Sensor3 48-Module Dimmer Rack - Designed for 3 phase 4 wire and ground operation at a maximum of 800A, 120/208V, 60Hz AC

QTY: 1. 7141A2006-4. SR3-48 DOOR - Black SR3-48 Locking Door with Filter
QTY: 4. HW6109. FVIP-RED - Floor Mount Iso Pads - Vibration Isolation Pads NDB-Red
QTY: 1. 7140A1003. CEM3 - CEM3 Control Module for use in Sensor3 Dimmer Racks. Includes front network connector, front USB reader, backlit number keypad, selector wheel, and backlit display. Supports 2- DMX IN, 1-additional Network, Panic Input, and RTO or BP connection

QTY: 1. 7140K1001 SR3-RTO - Sensor3 Ride Thru Kit - supplies power to CEM3 Control Module for a minimum of 6 seconds during brief power outages

QTY: 17. 7050A1003 D20 - Dual 20A Dimmer Module, 350µs rise time (34 Dimmers)
QTY: 24. 7083A1185 R20 - Dual 20A Relay module (48 Relays)
QTY: 2. 7050A1013 CC20 - Dual 20A Constant Current Module (4 Constant Breakers)
QTY: 5. 7050A1014 AFM - Air Flow Module

II. Distribution Devices to consist of:
A. PB-1, PB-2, PB-3, PB-4
QTY: 4. QUOTE-30014. 9102TOP - Surface Mount Outlet Box with: 2 – Panel mount 20A TRUEOne (TOP1) connectors with custom labels
"B. PB-5, PB-6 "
QTY: 2. QUOTE-30014. 9X01TOP-1AD - TBD Mount Outlet Box with: 1 – Panel mount 20A TRUEOne (TOP1) connectors 1 – Panel mount 20A Edison Duplex (5-20RD) connector with custom labels

C. FP-1, FP-2, FP-3, FP-4, FP-5, and FP-6
QTY: 6. QUOTE-30022. 8502TP-1B - TBD Size Floor pocket insert plate with: 1 - 20A Stage Pin (2P&G/GPC) connector 2 - 20A TrueONE (TOP) connector with Custom labels

D. Connector Strips; PS1, PS2, PS3, PS4
QTY: 4. QUOTE-30061. 9915-(6TRP/3)-1DX-XX - Connector strip 15'-0” long with: 6 - 18” pigtails and 20A TRUEOne (TOP1) connectors wired on 3 - 20A circuits 1 – XLR-5FDM3 DMX out connector wired on 1 universes 4 – Hanging Brackets

E. Connector Strips; PS5, PS6, PS7
QTY: 3. QUOTE-30061. 9940-(12TRP/6)-(4AD/2)-(4CO/1)-2DX-XX - Connector strip 40'-0” long with: 12 - 18” pigtails and 20A TRUEOne (TOP1) connectors wired on 6 - 20A circuits 4 – Panel mount 20A Edison Duplex (5-20RD) connectors wired on 2 - 20A circuits 4 – Panel mount 20A Grounded Twist-Lock (L5-20R) connectors wired on 1 - 20A circuits 1 – Active Pass-Thru DMX connectors (XLR-5FDM3) with power supply 1 – XLR-5FDM3 DMX out connector wired on X universes 12 – Hanging Brackets

F. DJB1 thru DJB5
QTY: 5. 7199A1054. GIJB-12-X/X - Gridiron junction box with terminals for up to 12-20 A circuits and two DMX XLR output connectors
QTY: 150. W713. 12/20 SO - 12 gauge, 20 conductor SO Multicable (1 run of 50') per electric
QTY: 10. 8001A2080. Traditional Cable Management single-purchase cable cradle
QTY: 8. 1085A1011. CD50-DMX - 50' DMX Cable
QTY: 6. HW636. MED LG KELLEMS - Dusttight Kellems grip for use with 10/16, 10/20, or 12/20 through 12/26 SO 1.25 to 1.50DIA
QTY: 3. HW6203. MLG SINGLE-EYEPKUP - Single-eye Pick-up grip for use with 10/16, 10/20, or 12/20 through 12/26 SO 1.25 to 1.49 DIA

III. Equipment Racks to consist of:
A. LNCR
QTY: 1. QUOTE-10031 RACK - Black 19" rack sized as job requires and to include: quad power box, and blank panels to fill
QTY: 1. QUOTE-10273 REAR - Mounting or securing system for rack above with quad power box
QTY: 1. QUOTE-10032 DOOR - Door for Rack
QTY: 1. QUOTE-10274 RACK HW KIT - Hardware Kit for Equipment racks with blank panels and required hardware

1. ERN2
QTY: 1. 7180A1713. ERn2-RM-120 Mk2 - ERn2 Enclosure Rack-mount 100-120 V Mk2
QTY: 1. 7180A1701. P-ACP-E - Paradigm Processor Mk2 - Enclosure for use in DRd Racks and ERn enclosures. Includes front network connector, and front USB-A connector, backlit number keypad, selector, and backlit display. Supports 2,048 channels of output and a max of 128 stations.

QTY: 1. 7182A1701. P-SPM-E - Paradigm Station Power Module - supports 63 stations and (1) 500m wire segment

2. SW-1 and NET Patch
QTY: 1. 2100A2008. PATCH PANEL 24X - 2U 19" rack-mount patch panel with 24 open slots
QTY: 24. N2027. Cat5e Modular Jack for above Patch Panel
QTY: 1. PJE1021. Snap-in blank for above Patch Panel
QTY: 1. SGE1061. MAP BR1 - 1U Brush Grommet Panel
QTY: 24. N4035. 2' CAT5 Patch cable, black
QTY: 1. SGN-C1300-28P-M. C1300-24P-4G - Cisco Catalyst 1300 Series Switch with: (24) Gigabit Ethernet PoE+ Ports with 195W power budget and (4) SFP ports, Fanless Operation, with ETC configuration preloaded

3. GTW-1 tru GTW-7
QTY: 3. 4268A1236. RSN-DMX4-T-RACK - Response Mk2 Four-port DMX/RDM Gateway to include:
- Four 3-pin terminal DMX connectors
- Display and 4-button user interface
- RJ45 Ethernet input
- Black Finish
- 1U Rack Mount Kit"

QTY: 3. 4268A1235. "RSN-DMX4-T - Response Mk2 Four-port DMX/RDM Gateway to include:
- Four 3-pin terminal DMX connectors
- Display and 4-button user interface
- RJ45 Ethernet input
- Black Finish"

4. Drawer and UPS
QTY: 1. PJE1074. MAP TD3 - 3 rack unit rack drawer with black textured finish
QTY: 1. SGPS1136. MAP S1000R - 1000VA / 750W 1U rack-mount UPS


IV. Architectural Control Devices to consist of:
A. ES6, ES7, and ES8
QTY: 3. QUOTE-20317. 1IFP-X - 1-Gang Inspire Class 2 Faceplate - Standard Color TBD
QTY: 3. QUOTE-20313. PI1004-_Z - Paradigm Inspire Button Station (Standard Color TBD) to include:
- 4-button electronics assembly
- Single gang decorator faceplate (not included)
- Custom laser engraved keycaps
- Installation hardware"

QTY: 2. 2276K1000. Single Pipe Strap Style U-Bolt Kit (2 Needed for 3 gang and above)
QTY: 2. 2211A2001. 1G BACKBOX 3.5" DISTRO UBOLT MNT BLK

B. ES1, ES2, ES3, ES4, and ES5
QTY: 5. QUOTE-20317. 1IFP-X - 1-Gang Inspire Class 2 Faceplate - Standard Color TBD
QTY: 5. QUOTE-20311. PI1001-_Z - Paradigm Inspire Button Station (Standard Color TBD) to include:
- 1-button electronics assembly
- Single gang decorator faceplate (not included)
- Custom laser engraved keycaps
- Installation hardware

C. TP-1
QTY: 1. 7184A1542-4. P-TS7-E-4 - Paradigm 7" Touchscreen Station to include: - 7" Black Touchscreen Assembly - Mounting Collar - Ethernet termination kit
QTY: 1. 7184A1521. P-TS7-RM - Paradigm 7" Touchscreen Rack-Mount Kit

D. TP-2
QTY: 1. 7184A1562. P-TS7-PE - Paradigm 7" Ethernet Portable Touchscreen Station to include: - 7" Black Portable Touchscreen - 10' Ethercon to RJ-45 cable
QTY: 1. SGM1375 ETC 25' NET CABLE - 25' Network Cable - Proplex (Cat 5, Neutrik Ethercon)


V. Control Devices to consist of:
A. Gateway

QTY: 1. 4268A1232. RSN-DMX4-I - Response Mk2 Four-port DMX/RDM Gateway to include:
- Four 5-pin XLR DMX input connectors
- Display and 4-button user interface
- RJ45 Ethernet input
- Black Finish

B. BPS and SPS
QTY: 2. QUOTE-10024. ECPB NET/NET/NET - Net / Net / Net / A/C Control Plug-in Station with: 3 - RJ-45 (568B) Connector in XLR case with custom labels

QTY: 2. 1064A1039. 3SBD-4 - ETC 3-gang Surface Mount Back Box (3.5" deep)
C. DO

QTY: 10. QUOTE-10024. ECPB DMX OUT - DMX Output Control Plug-in Station with:
1 - XLR-5FDM3 DMX Out Connector (labeled """"DMX OUTPUT"""")

QTY: 10. 1064A1039. ECPB PB1 - ETC 1-gang Surface Mount Back Box (2.5" deep)